It has the Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine along with various engine options (AC/No AC, etc.). Included are Instrucional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts. ![]() It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC In-Line 4-Cylinder Engines along with various engine options (AC/No AC, etc.). Both are included Below Click on the following free direct Link. Posted by Asker under 1997 Mazda Protege for their 2002 Mazda Protege 5. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them Using your other hand - Pull the Belt up and over the Last remaining Pulley. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley. This spring is pretty hard and with a new belt, it will be even harder to install. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys.over, under, left right. This will be the last Pulley that the belt will go on. Pick a Pulley that is most easily accessed. Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner: a. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Remove the loosened belt off one of the other more easily accessed Pulleys. The Tensioner is spring loaded, and is hard to rotate/move. ![]() Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. Feel Free to contact me at ! "HOW TO": Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner: 1. Let me know if this helped, or if you have additional information questions. It has the correct Serpentine Belt Diagrams for your 1997 Mazda Protege depending on your Engine Size (1.5L or 1.8L) and Options (AC/No AC etc.). SOURCE: I need a diagram on How to change a Serpentine belt for a 97 mazda protegeĬlick on the following free direct Link.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |